How to Install An air Conditioner Bracket?

設置エアコンブラケットはいくつかの手順を確実にユニットを搭載する安全に正します。 この包括的なガイドのインストール方法は、エアコンブラケット:

1. Lift the air conditioner unit one side at a time to check if its weight is centered or off-center to the left or right. This will help you determine the best placement for the bracket.

2. Measure the width of the exterior window sill and divide this measurement in half to mark the center point on the sill. If the A/C has a centered weight, use the middle mark. If it’s heavier on one side, make a second mark 3 inches to the right or left of the first center mark.

3. Find the mounting block that came with the bracket kit and drill a hole where you marked on the window sill. Attach the block with a screw.

4. Position the next block from the kit on the mounting block and attach the top bracket bar with screws to the sill blocks. Do not tighten these screws completely yet.

5. Take the bottom mounting bracket and attach it loosely with bolts to the top bracket. Adjust the brackets using a level on the top bracket, ensuring they are level and angle them very slightly downward so water will drip away from the house.

6. Once the bracket is positioned correctly, tighten all screws and bolts securely.

7. Mount the A/C unit on the bracket according to the manufacturer’s directions, making sure it is securely in place and stable.

steps of installing an air conditioner bracket
jaJapanese
上部へスクロール
GDPRクッキーの同意を実際のクッキーバナー